ONE (1) USED: 4A WARNER & SWASEY LONG BED SQUARE HEAD TURRET LATHE
Lathes, Turret Saddle TypeONE (1) USED: 4A WARNER & SWASEY LONG BED SQUARE HEAD TURRET LATHE
Model M-3550 S/N-1849747 Yr. Mfg. 1962
Model | 4A M-3550 |
Swing | 28.25" |
Center Distance | 124 in |
Dimensions | 23'Long. X 84"Wide X 84" High |
Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 124"
Center Distance Spindle Nose To Turret Face 120"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size 25" 3-Jaw 25” W/Reversible Hard Top Jaws
Feeds Cross .0035 To .167 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 50 / 25 Hp.
23'Long. X 84"Wide X 84" High
Weight 24,000 Lbs.
Flange Holders (4) Long 12"
Flange Holders (2) Short 6"
Coolant Pan And Pump Yes
Tool Post 4 Way On Front Yes
Cross Sliding Rear Turret Yes
Rapid Traverse Front & Rear Carriages Yes
Machine has been cleaned, painted, and cycled.
In good running condition.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $139,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks