48" New Rotary Dura Blast Cabinet And Dust Collector System The machine is considered a plug and play system and is easily moved by utilizing the built-in fork pockets to locate the machine. It is a free-standing cabinet that has a heavy duty, lined, 48” table with a 5000 lb. capacity for material handling. It has one direct drive 15HP, 7-blade blast wheel, and our dust collector can be mounted directly to the machine to save additional floor space. The PLC/Touch Screen controlled, electrical panel is mounted on the right side of the cabinet and is protected by vibration dampening mounts. We utilize a double elevator system to fully air wash all the abrasive thrown by the blast wheel. The two-belt system allows us to keep the air wash and trash clean-out at eye level, so it is easier to adjust and maintain. This design also allows us to keep the overall height to a minimum, by removing the air wash from above the hopper. Many of our “standard” features are add-ons and upcharges with other manufacturers, so pay close attention to quotes on similar machines, to see what you are getting for your money.
|Table Size||48 in|
|Dimensions||R-L 7’9” x F-B 7’9” x Height 9’1O”|
We provide a one-year warranty, full technical support, and readily available replacement parts. The machine is considered a plug and play system and is easily moved by utilizing the built-in fork pockets to locate the machine. It is a free-standing cabinet that has a heavy duty, lined, 48” table with a 5000 lb. capacity for material handling. It has one direct drive 15HP, 7-blade blast wheel, and our dust collector can be mounted directly to the machine to save additional floor space. The PLC/Touch Screen controlled, electrical panel is mounted on the right side of the cabinet and is protected by vibration dampening mounts. We utilize a double elevator system to fully air wash all the abrasive thrown by the blast wheel. The two-belt system allows us to keep the air wash and trash clean-out at eye level, so it is easier to adjust and maintain. This design also allows us to keep the overall height to a minimum, by removing the air wash from above the hopper. Many of our “standard” features are add-ons and upcharges with other manufacturers, so pay close attention to quotes on similar machines, to see what you are getting for your money. SPECIFICATIONS – DURABLAST 48” TABLE CENTRIFUGAL BLAST WHEEL Wheel: The direct drive blast wheel revolves at 3600 RPM for maximum abrasive velocity. The blast wheel is available in 12”, 13.5” and 15” diameters. Balanced wheel components assure smooth operation. Blades: Long life, abrasive resistant cast alloy blades, matched by weight for proper wheel balance. Control Cage: Dial type cage. Blast Wheel Housing: Available in ¼” mild steel, AR steel, or manganese steel. All liners are replaceable. CABINET CONSTRUCTION Outer Cabinet: AR 500 construction, fork truck pockets for easy placement. Cabinet Lining: Replaceable cast alloy liners in direct blast area, options to fully line the blast cabinet area, or just line certain areas as needed. Worktable: 48” diameter worktable is constructed of 1/2” steel plate. Table liner is 3/8” abrasive resistant steel. Cabinet cutout makes worktable accessible by overhead hoist. Heavy duty table support bearings are completely enclosed for protection from stray abrasive. Table Drive: Chain driven by an electric motor and gear reducer located under the table. Table revolves at 4 RPM. Double-Lock Door: Our 48-table door has both a pneumatically operated air cylinder clamp, and a pneumatically operated vertical door pin. If power or air is cut to the machine, the door cannot open, and we integrate a timer in case the E-Stop is activated, so you have to wait for the wheel to slow down before you can open the door. Rubber door seal helps prevent abrasive escape. A mangalloy door skin helps reduce wear on the inside of the door, and does away with unwanted rubber liners. Work Loading Height: 36” Maximum Working Dimensions: 48” diameter, 19” high at edge of table and 37” height at center of table. Workload 7,055 Capacity: 5,000 pounds. ABRASIVE CLEANING & RECOVERY SYSTEM Elevator and Air Wash: Double V-belt system that carries the abrasive to an adjustable, eye-level separator where 100% of the abrasive is air washed, then cleaned abrasive is carried up to the abrasive storage hopper for feeding of the blast wheel. Easy access screens are in place to help keep larger, foreign items from damaging the blast wheel components. Elevator belts are adjustable to prevent the belts from slipping as they wear. Abrasive Flow: Manually adjustable, butterfly type abrasive valve for setting blast wheel amperage and controlling abrasive flow. Optional Magna-Valve available for automatic adjustment with different abrasives or Shot Peening use. Abrasives: Most standard shot or grit type abrasives can be used, and the initial abrasive charge is 1000 lbs. Dura-Blast Six16 Dust Collector, 800 CFM, Reverse Pulse, 6 Cartridge, 240/480-volt 3ph electrics, 48TB & 6BB $7,055.00 Included Separator: 12” gravity lip has adjustable abrasive spreader and refuse gate for maximum contaminate removal. SPECIFICATIONS – DuraBlast 48” TABLE BLAST VENTILATION *Optional Dust Collector: Requires 800 CFM Power & Air Requirements Control Panel: Nema 12 electrical enclosure, optional voltages available, 3 phase, PLC/Touchscreen controlled, standard automated cycle, digital cycle timer, various adjustable machine timers, audible alarm, heavy duty push buttons, ammeter, and overload protection. Required Air: 80-100 PSI at 5-10 cfm to operate door latch, door safety pin, abrasive valve, and dust collector cleaning cycle. Electric Motors: 15HP blast wheel motor, 1HP table drive motor, 1HP elevator motor, and 2HP dust collector motor. Optional Blast Wheel Configuration: Two (2) 10HP, 3600RPM blast wheels Standard Operating & Safety Information Safety: Blast wheel will not operate if door is not closed. Door pin safety system keeps the door from opening, even if all power is lost. Standard guards, covers, warning labels, and electrical protections in place. Noise: Approximately 80 DB if properly maintained and in good functioning condition. Shipping Information: Approximately 5600 lbs., ships in one piece on a single-drop trailer, and overall footprint is 7’9” wide x 7’9” deep x 10’ tall. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Dura-Blast 48” Table Blast Standard Features included in Price: (1) 15 HP Direct Drive 12” Blast Wheel Assy. Mounted on hip. 1/2” White iron alloy Liners in line with Blast Wheel Mangalloy and AR500 Blast Cabinet and Door Dual V-Belt Elevator Belts with Poly Buckets Digital Blast Cycle Timer, Hour Meter, Amp Meter on Touch Screen AR500 Table Liner 12” Single Lip Separator with removable screen above separator Options: Auto Abrasive Adder Hopper: $1,750.00 Magnavalve (each): $3,900.00 Cast Alloy Liners on RH Wall: $3,500.00 Cast Alloy Liners Roof: $3,500.00 Cast Alloy Liners Back Wall: $3,500.00 Manganese Table Liner: $750.00 Variable Freq. Drive Blast Wheel 460/3/60: $3,900.00 Variable Freq. Drive Blast Wheel 230/3/60: $4,500.00 Foundry Duty Elevator (2 – 20” Separators): $12,000.00 2nd Blast Wheel Option (2) 10Hp Blast Wheels: $8,000.00 Options: DuraBlast 616 Dust Collector (Pulse Type, 6 Cartridges, 800 cfm, Magnehelic Gauge) 616 (mounted on machine, used with 5-Gallon Bucket): $8,300.00 616 (not on machine, for use with 55-Gallon Barrel): $9,200.00 HEPA After Filter: $1,250.00 Photohelic Gauge Kit: $675.00 Silencer: $675.00 Dura-Blast Shot Trap (6” inlet/outlet): $1,725.00 Foundry Duty option requires different dust collector: DuraBlast 1032 Dust Collector, 1500 cfm: $11,900.00 (Pulse Type, 10: $2,750.00 Photohelic Gauge Kit: $750.00 Silencer: $925.00 Ductwork: Quoted on request ***Prices shown are in US Dollars and are exclusive of all federal, state, and local, excise, sales, use and similar taxes and are subject to change without notice. Terms: 60% Down with Purchase Order 30% Due at Machine Runoff 10% Due 15 days after Shipment Freight will be included on final 10% invoice unless customer arranges own shipping. Quote Valid for 30 Days. Prices do not include transportation or freight charges. We strongly encourage a representative from your company to be present at runoff. Warranty Please refer to the following page for the specifics of our one-year warranty. All new Dura-Blast equipment includes our standard one-year warranty. We truly appreciate the opportunity to do business with your company and look forward to quickly providing you the best valued abrasive blast parts and equipment. WARRANTY This equipment is sold by Plan B Services & Solutions, LLC (hereafter referred to as Plan B) under the warranty set forth in the following paragraph. Such warranty is extended only to the buyer who purchases the equipment directly from Plan B or its authorized distributor as new merchandise. This equipment, other than its expendable parts, is warranted by Plan B to be free from manufacturing defects for one year after delivery, provided that the same is properly operated under conditions of normal use and that regular periodic maintenance and service is performed or replacements made, in accordance with the instructions provided. Expendable parts of this equipment is warranted to be free from manufacturing defects at the time of delivery by Plan B. Plan B’s sole obligation under this warranty is limited to making replacements at its factory location for equipment or parts which are returned to it with transportation charges prepaid and which, upon Plan B’s examination, have been found to be so defective. Plan B shall not be liable for consequential damages or special damages. The foregoing warranty shall not apply if the equipment has been subject to abuse, misuse, negligence, or accident, or if the equipment is used with other than Plan B supplied parts. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THIS EQUIPMENT CONTAINED IN THE MANUAL, OTHER THAN THE FOREGOING WARRANTY. USER RESPONSIBILITIES This equipment will perform safely and reliably only when installed, operated, maintained, and repaired in accordance with the instructions provided. Components must be checked periodically and repaired, replaced, or reset as necessary for continued safe and reliable performance. Defective equipment should not be used. Parts that are broken, missing, plainly worn or distorted should be replaced immediately with parts that are manufactured or sold by Plan B. The equipment or any of its parts should not be modified without the prior written approval of Plan B. The user of this equipment shall have the sole responsibility for any malfunction which results from improper use, faulty maintenance, or from parts that have been damaged or modified by anyone other than Plan B or Plan B's authorized representative. End User Responsibilities With all industrial equipment purchases, there are certain items/requirements that are not included with the purchase of the equipment and are the responsibility of the buyer. Below is a partial list of the most common items associated with this type of equipment. Please review and get with your sales representative with any additional questions. On Location • Is your floor flat, smooth, and weight rated for the weight of the equipment and the parts to be processed. • You should have any items needed to level and possibly anchor the machine to the floor. • Do you have an adequate structure to protect the equipment from moisture and weather? • Have you planned for any structural changes to accommodate ductwork and equipment? • Have all permits, inspections, and licenses been approved and acquired? • Do you have available power, air, and lighting for installation needs? • Have you made arrangements for any needed ductwork to connect the machine to the dust collector? Electrical • Is there an adequate disconnect for the needed amp draw? • You may need to run wiring between machine components, dust collection equipment, I/O boxes, etc. • All existing electrical connections on the equipment should be checked after shipment, to make sure connections have not come loose. • Existing power supply should match the requested machine voltage. Compressed Air • All required hard pipe, air hose, and connections should be available on location. As is the case with most air-fed plant equipment, the air should be dry, free of oil and any other contaminants, and be adequate to supply the equipment purchased. Sales representative should be able to provide air requirements. • Any performance or quality issues that result from poor quality compressed air, whether negligent or caused by outside variables, may void any warranty on certain parts. • Quality compressed air is needed for solenoids, air cylinders, abrasive valves, dust collectors, filters, and any air lines or fittings. Poor quality air may cause issues with these components and be the cause of costly non-warrantied repairs.