FEATURES:
Jet GH - 1460 ZX Series Large Spindle Bore
14" ZX SERIES LARGE SPINDLE BORE LATHES
Uniquely designed exclusively by JET
* ISO 9001 certified manufacturer
* 3-1/8" bore spindle is supported by two tapered and one ball bearing
Chrome molybdenum headstock gears are hardened, ground,and shaved
Universal gearbox allows inch, metric, diametral, and
module pitch threads, no change gears required
Carriage Feature one-shot lubrication and Turcite B on
bed sliding surfaces
T-slotted compound slide featuring a four-way tool post One-piece cast iron base
absorbs vibration allowing heavier cuts
High-quality ANSI Class 50 wear-resistant cast iron bed
ways are hardened and ground
Removable gap allows up to 23-5/8" diameter work
Five position automatic carriage stop increases productivity
Attractive chrome control levers, dials, and knobs
complete this impressive package Large easy to use foot brake
Model Number................................................GH-1440ZX
Swing Over Bed..............................................14"
Swing Over Cross Slide......................................7-5/8"
Swing Through Gap...........................................23-5/8"
Length of Gap...............................................12"
Distance Between Centers....................................60"
Spindle Bore................................................3-1/8"
Spindle Mount...............................................D1-8
Spindle Taper with Sleeve...................................MT-7 (MT-5)
Number of Spindle Speeds....................................12
Range of Spindle Speeds (RPM)...............................42 - 1,800
Number of Longitudinal and Cross Feed Rates.................122
Range of Longitudinal Feeds (IPR)...........................0.0015 - 0.0913
Range of Cross Feeds (IPR)..................................0.0006 - 0.0365
Number of Inch Threads......................................61
Range of Inch Threads (TPI).................................1-5/8 - 72
Number of Metric Threads....................................24
Range of Metric Threads.....................................0.05 - 20
Number of Diametral Pitch Threads...........................45
Range of Diametral Pitch Threads............................3-1/4 - 96
Number of Modular Pitch Threads.............................20
Range of Modular Pitch Threads..............................0.25 - 10
Max Tool Size...............................................1" x 1"
Compound Slide Travel.......................................5-1/8"
Cross Slide Travel..........................................9"
Carriage Travel.............................................36-9/16"
Tailstock Spindle Travel....................................5"
Taper in Tailstock Spindle..................................MT-4
Follow Rest Capacity........................................1/2" - 3-1/2"
Steady Rest Capacity........................................3/8" - 7"
Width of Bed................................................13-1/8"
Motor (HP)..................................................7-1/2 HP, 230/460
Prewired....................................................230V 3 Phase
Overall Dimensions..........................................R-L 126" x F-B 44" x Height 66"
Weight .....................................................5,187 Lbs.
STANDARD EQUIPMENT
* 10" 3-jaw scroll chuck with top reversing jaws
* 12" 4-jaw independent chuck
* Four-way tool post
* Follow rest
* Large capacity steady rest
* Fully integrated coolant system
* Full length splash guard and coolant return
* Articulating halogen work lamp
* Centrally located controls with jog button
* Threading dial
* Mounting pads and levelers
* Spindle sleeve (MT-7 to MT-5)
* Dead center
* Live center
* Chuck Guard
Note:
Machine Has Been Cleaned And Cycled.
FEATURES:
Jet GH - 1460 ZX Series Large Spindle Bore
14" ZX SERIES LARGE SPINDLE BORE LATHES
Uniquely designed exclusively by JET
* ISO 9001 certified manufacturer
* 3-1/8" bore spindle is supported by two tapered and one ball bearing
Chrome molybdenum headstock gears are hardened, ground,and shaved
Universal gearbox allows inch, metric, diametral, and
module pitch threads, no change gears required
Carriage Feature one-shot lubrication and Turcite B on
bed sliding surfaces
T-slotted compound slide featuring a four-way tool post One-piece cast iron base
absorbs vibration allowing heavier cuts
High-quality ANSI Class 50 wear-resistant cast iron bed
ways are hardened and ground
Removable gap allows up to 23-5/8" diameter work
Five position automatic carriage stop increases productivity
Attractive chrome control levers, dials, and knobs
complete this impressive package Large easy to use foot brake
Imperial
| Swing | 14" |
| Swing Over Cross Slide | 7.625" |
| Centers | 60" |
| Spindle Bore | 3.125" |
| RPM | 1,800 RPM |
| Power | 7.5 hp |
| Dimensions | R-L 126" x F-B 44" x Height 66" |
| Weight | 5,187 Lbs. |
Model Number................................................GH-1440ZX
Swing Over Bed..............................................14"
Swing Over Cross Slide......................................7-5/8"
Swing Through Gap...........................................23-5/8"
Length of Gap...............................................12"
Distance Between Centers....................................60"
Spindle Bore................................................3-1/8"
Spindle Mount...............................................D1-8
Spindle Taper with Sleeve...................................MT-7 (MT-5)
Number of Spindle Speeds....................................12
Range of Spindle Speeds (RPM)...............................42 - 1,800
Number of Longitudinal and Cross Feed Rates.................122
Range of Longitudinal Feeds (IPR)...........................0.0015 - 0.0913
Range of Cross Feeds (IPR)..................................0.0006 - 0.0365
Number of Inch Threads......................................61
Range of Inch Threads (TPI).................................1-5/8 - 72
Number of Metric Threads....................................24
Range of Metric Threads.....................................0.05 - 20
Number of Diametral Pitch Threads...........................45
Range of Diametral Pitch Threads............................3-1/4 - 96
Number of Modular Pitch Threads.............................20
Range of Modular Pitch Threads..............................0.25 - 10
Max Tool Size...............................................1" x 1"
Compound Slide Travel.......................................5-1/8"
Cross Slide Travel..........................................9"
Carriage Travel.............................................36-9/16"
Tailstock Spindle Travel....................................5"
Taper in Tailstock Spindle..................................MT-4
Follow Rest Capacity........................................1/2" - 3-1/2"
Steady Rest Capacity........................................3/8" - 7"
Width of Bed................................................13-1/8"
Motor (HP)..................................................7-1/2 HP, 230/460
Prewired....................................................230V 3 Phase
Overall Dimensions..........................................R-L 126" x F-B 44" x Height 66"
Weight .....................................................5,187 Lbs.
STANDARD EQUIPMENT
* 10" 3-jaw scroll chuck with top reversing jaws
* 12" 4-jaw independent chuck
* Four-way tool post
* Follow rest
* Large capacity steady rest
* Fully integrated coolant system
* Full length splash guard and coolant return
* Articulating halogen work lamp
* Centrally located controls with jog button
* Threading dial
* Mounting pads and levelers
* Spindle sleeve (MT-7 to MT-5)
* Dead center
* Live center
* Chuck Guard
Note:
Machine Has Been Cleaned And Cycled.
We use cookies to improve your experience. Privacy Policy.