One Used 1 A Warner & Swasey Square Head Saddle Type Turret Lathe Model 3400 Lot 33 Year 1964
Have one to sell?
ConditionUsed
1 available
One Used 1 A Warner & Swasey Square Head Saddle Type Turret Lathe Model 3400 Lot 33 Year 1964
Model #1A....................................(M-3400) Square Head
Swing Over Bed Ways..........................18"
Swing Over Carriage Horn.....................13-1/4"
Distance Spindle To Turret Face..............43-3/4"
Chuck Size ..................................16"3-Jaw
Diameter Of Spindle Hole.....................3"
Spindle Nose Taper...........................A1-8"
Spindle Speed................................(16) 40 TO 1,497 RPM
Maximum Turning Length.......................32-1/8"
Cross Slide Travel...........................11"
Cross Slide Longitudinal Travel..............34-7/8"
Longitudinal And Turret Feeds................(16) 0.004 TO 0.149 IPR
Cross Slide Feed.............................(16) 0.0022 TO 0.073 IPR
Rapid Traverse Rate..........................34-1/2 FPM
Main Motor...................................30/15Hp.
Floor Space..................................R-L 150" X F-B 72"
Machine Height...............................64"
Machine Weight...............................9,500 Lbs.
Slide Tool Holders...........................2
Flange Holders...............................4
Rapid Traverse...............................Yes
Coolant And Chip Pan.........................Yes
Price includes a new 16" 3-Jaw steel body chuck list price is $4,658.00
my cost is $2,950.00 including incoming freight to me,
and freight to you is $675.00. You will be responsible for unloading.
Note: Machine will be cleaned and cycled with everything working.
New oil and filter.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide. Gibs reworked and refitted.It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $46,500.00 for the above work completed.
If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame 12 to 14 weeks with current workload.
We use cookies to improve your experience. Privacy Policy.