3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Swing Over Bed Ways......................................23-1/2"
Swing Over Cross Slide Carriage..........................18"
Center Distance..........................................43"
Spindle Hole.............................................6-1/4"
Spindle Speeds...........................................24 To 851Rpm's
Spindle Nose.............................................A-15
Chuck Size...............................................20" 4-Jaw
Feeds Cross..............................................0.0025 To 0.082 I.P.R.
Feeds Long...............................................0.005 To 0.167 I.P.R.
Main Motor...............................................40/20 Hp. 480 Volts
Flange Holders...........................................Short 2
Flange Holders Long......................................1
Weight...................................................15,000 Lbs.
Floor Space..............................................180" L. X 83" W.
Machine Height...........................................64"
Coolant..................................................Yes
Tool Post 4 Way On Front.................................Yes
Rapid Traverse Front And Rear............................Yes
Fixed Rear Turret........................................Yes

Note:
Machine will be cleaned, painted and cycled.

Condition:...............................................Good
Note:
Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned.
Rapid Traverse Drive Box Reconditioned.
New Bearings, In Main Motor.
New Feed And Rapid Shafts. Headstock Cleaned And Flushed.
New Filters And Oil.
New Lockdown Pin And Bushing In Hex And Square Turrets.
New Nut And Screw In Cross Slide And Hex Turret.
Gibs Reworked And Refitted.
New 20"4-Jaw Gator Chuck W/ Reconditioning.
Machine May Be Seen Under Power With Proper Notice.
Price after reconditioning $64,500.00