2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 78

Swing Over Bed Ways............................20-1/2"
Swing Over Cross Slide Carriage................16"
Center Distance................................43"
Spindle Hole...................................3-3/4"
Spindle Nose...................................A - 11
Spindle Speeds.................................6 To 1,117 Rpm's
Chuck Size.....................................15" 3-Jaw
Feeds Long.....................................0.005 To .167 I.P.R.
Feeds Cross....................................0.0025 To .082 I.P.R.
Main Motor.....................................20 / 40 Hp. 440 Volts
Floor Space....................................R-L 150" X F-B 83"
Machine Height.................................65"
Weight.........................................12,500 Lbs.
Flange Holders Long............................1
Flange Holders Short...........................4
Cross Sliding Rear Turret......................Yes
Rapid Traverse Front & Rear Carriages..........Yes
Tool Post 4 Way On Front Carriages............ Yes
Coolant........................................Yes

Note: As is, everything in working condition. Machine cleaned, painted and cycled.

Note Reconditioning: Machines front & rear aprons and rapid traverse box
will be reconditioned. Rapid traverse drive box will be reconditioned, new
bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed,
new filters and oil. New lockdown pin and bushing in hex and square turret. New nut
and screw in cross slides front and rear. Gibs reworked and refitted.
It is recommended that you re-bore the flange tool holders on the
rear turret to ensure they are on center once the machine is level.
Machine will be cleaned, painted, and cycled. Machine may be seen under power with
proper notice.
It will take about 12 to 14 weeks to complete the reconditioning once a P.O. is
received.Reconditioned Price: $64,500.00
Payment is due in full prior to shipping.