Used 1972 WARNER & SWASEY 5A M-3870 Lot 9 | Lathes, Turret Saddle Type
Have one to sell?
ConditionUsed
1 available
5 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Swing Over Bed Ways............................36"
Center Distance................................96"
Swing Over Cross Slide Carriage................32-3/4"
Spindle Hole...................................9-1/4"
Spindle Speeds.................................10 To 526 Rpm's
Spindle Nose...................................A-15
Chuck Size (New Heavy Duty Gator)..............28" 4 Jaw
Feeds Cross....................................0.0035 To 0.167 I.P.R.
Feeds Long.....................................0.005 To 0.167 I.P.R.
Full Length Threading..........................3/4 To 36 TPI
Main Motor.....................................75 / 37.5 Hp. 480
Floor Space....................................R-L 291 X F-B 84"
Height.........................................84"
Weight.........................................26,000 Lbs.
Flange Holders.................................5
Tool Post 4 Way On Front.......................Yes
Rapid Traverse Front And Rear..................Yes
Cross Sliding Rear Turret......................Yes
Tapers Front & Rear............................Yes
Coolant........................................Yes
Note: Machine will be cleaned, painted, and cycled.
Machine may be seen under power with proper notice.
Machine is in good running order.
Note Reconditioning:
Machine's front and rear aprons reconditioned.
Front & rear rapid traverse boxes will be reconditioned.
Rapid traverse drive box reconditioned.
New bearings in main motor.
New feed and rapid shafts.
Headstock cleaned and flushed, new filters and oil.
New lockdown pin and bushing in hex turret and square turret.
New nut and screw in front cross slide.
Gibs reworked and refitted.
It is recommended that you rebore the flange tool holders on the rear
turret to ensure they are on center once the machine is level.
Reconditioning will take 10 To 12 weeks after receipt of P.O.
Price after reconditioning $139,500.00
Optional:
New 32" 4-Jaw Gator Heavy-Duty Chuck...........$17,350.00
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 28"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $174,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
We use cookies to improve your experience. Privacy Policy.