New WHACHEON HL-630-3000 | New Machinery, Engine Lathes
Have one to sell?
ConditionNew
New
24" X 78" Whacheon Engine Lathe (Mori Seiki Copy)
Swing Over Bed Ways 24.8"
Swing Over Cross Slide 14.9"
Bed Width 20.7"
Center Distance 78"
Spindle Hole 3-1/32"
Spindle Speeds 27 To 1,205 Rpm's
Spindle Nose D-1-8
Chuck Size No
Feeds Cross .0010 Ro .029 I.P.R.
Feeds Long .0015 To .0433 I.P.R
Threads Inch 2 To 56 T.P.I.
Threads Metric 5 To 14 MM
D.P. 4 TO 56 T.P.I.
Module 1 TO 7 T.P.I.
Cross Slide Travel 15.35"
Compound Rest Travel 6.69"
Tail Stock Quill Diameter 3-1/4"
Tail Stock Quill Travel 6"
Tail Stock Taper # 5 Morse
Main Motor 15 Hp.
Machine Dimension 146" L X 60"
Height 60"
Weight 7,630 Lbs.
Coolant Pan Yes
Thread Dial Yes
Hardened And Ground Ways Yes
Optional:
Follow Rest
Oversized Steady Rest (11"X 17")
Telescopic Taper Attachment
Note Warranty Available
Condition New
Machine Features:
Number(12 steps) and range of speeds of this lathe is so created that the most suitable cutting speed may be given to any size of workpiece diameter within the possible range of cutting size, namely, within the range of swing over bed.
The main spindle is supported at three points by precision bearings and its hole is generously sized.
Automatic forced lubrication system supplies lubricant to every sliding way and driving mechanism inside the headstock.
By lubricating device installed inside apron, automatic lubrication is provided between carriage slideways and bed ways.
An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop.
The machine is equipped with an overload safety device for feeding and thread cutting.
Cross feed screws are always supplied a proper quantity of grease more than one time per a week for maintaining smooth travel under maximum accuracy.
Bed is so designed to prevent torsion, side-wall is double wall and rib type.
Hardened and ground bed ways are made of high tensile cast iron. Produced under the license of Meehanite Know-How.
Lower portions of bed casting are box-shaped and are full length, forming the legs, chip pan and coolant reservoir.
The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock.
Standard Accessories:
Center sleeve
Change gear 78T
Face plate (0550)
Installation block
Coolant equipment
Tool kits & box
Carbide center MT #5
Worm gear (14T, 19T, 20T, 24T)
Steady rest (Standard · 6" -11 ")
Carriage micro stopper
Driving plate (0330)
Face plate (0635)
Optional Accessories:
Follow rest (1.5" -5")
Live center
Change gear (65T, 157T)
Taper Attachment
Roller type. 6"-11")
Tailstock quill reduction equipment
Steady rest (Over size · 11"-17",
Follow rest (1.5" -5")
We use cookies to improve your experience. Privacy Policy.