30" X 120" Used Mazak Engine Lathe

Swing Over Bed Ways......................................30"
Swing Over Cross Slide...................................20-3/4"
Swing In Gap.............................................40-1/8"
Length Of Gap............................................12-1/2"
Center Distance..........................................120"
Spindle Hole.............................................4.125"
Spindle Speeds...........................................30 To 1,200 Rpm's
Spindle Nose.............................................D-1-11
Chuck Size...............................................20" 4-Jaw New With 2 Piece Jaws
Feeds....................................................0.0048 To 0.2694 I.P.R.
Threads Inch Normal......................................2 To 28 TPI
Threads Inch Coarse......................................8 To 56 TPI
Threads Metric Normal....................................1 To 14 MM
Threads Metric Coarse....................................16 To 200 MM
Tail Stock Quill Diameter................................3-5/16"
Tail Stock Quill Travel..................................11-1/2"
Tail Stock Taper.........................................# 6 Morse
Tail Stock...............................................2 Speed
Main Motor...............................................20 Hp. 220/440
Floor Space..............................................R-L 16' X F-B 60"
Machine Height...........................................66"
Weight...................................................12,000 Lbs.
Rapid Traverse (4 Way)...................................Yes
Coolant Pan..............................................Yes
Taper Attachment.........................................Yes
Thread Dial..............................................Yes
Hardened And Ground Ways.................................Yes

Note:
Machine has been cleaned, painted, and cycled.
Headstock and gear boxes have been flushed and cleaned and checked.
New belts, oil and slight glasses.
New nut and screws in compound and cross slide.
New 16" 3-Jaw Chuck
New Coolant pump and lines.

Condition: Good