Used 1957 WARNER & SWASEY 4A M-3580 Lot 4B | Lathes, Turret Saddle Type
Have one to sell?
ConditionUsed
1 available
4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 12-1/2
Spindle Speeds 20 To 526 Rpm's
Chuck Size (New Heavy Duty) 24" 4 Jaw New Gator
Spindle Nose A-15
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Threading Front & Rear 1-36 TPI
Main Motor 60/30 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 80"
Weight 22,000 Lbs.
Taper Attachment On Rear Turret Yes
Long Flange Holders 1
Short Flange Holder 2
Tool Post 4 Way On Front Yes
Cross Sliding Rear Turret Yes
Full Chip Pan And Coolant Yes
Rapids Yes
Coolant Yes
Reconditing Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.
We use cookies to improve your experience. Privacy Policy.