30" X 120" Used Mazak Hollow Spindle Engine Lathe

Swing Over Bed Ways................................30"
Swing Over Cross Slide.............................20-3/4"
Bed Way Width......................................22"
Center Distance....................................120"
Spindle Hole.......................................12-1/2"
Spindle Speeds.....................................5 To 300 Rpm's
Spindle Nose A-20
Chuck Size With 12-1/2" Hole (2)...................24" 4-Jaw New
Feeds Long. (40)...................................0.0025 To .0356 IPR
Feeds Cross (40)...................................0.0013 To .0178 IPR
Threads Inch (50)..................................1 To 28 T.P.I.
Threads Metric (41)................................1 To 28 MM
Tail Stock Quill Diameter..........................3-1/2"
Tail Stock Quill Travel............................11-13/16"
Tail Stock Taper...................................# 6 Morse
Main Motor.........................................20 Hp.
Machine Floor Space................................R-L 16" X F-B 60"
Machine Height.....................................84"
Weight.............................................18,000 Lbs.
Chip Pan...........................................Yes
Taper Attachment...................................Yes
Thread Dial........................................Yes
Push Button Controls...............................Yes
Rapid Traverse.....................................Yes

Note:
It will take about 90 days to go thru this machine. Headstock
will be flushed and new oil and filter added, Apron , cross slide
and compound removed and cleaned, new slight glasses installed.
Taper attachment cleaned and freed up. Two new Gator 25" 4 Jaw chuck
installed. New Belts. Machine will be cleaned, painted and cycled after
the above work is completed.