4 A Used Warner & Swasey Square Head Model 3550 Saddle Type Turret Lathe
|Center Distance||62 in|
|Dimensions||20' Long. X 84" Wide X 84 High|
Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Chuck Size 24"3-Jaw Power Wrench Spindle Nose A-15 Feeds Cross .004 To .090 I.P.R. Feeds Long. .005 To .167 I.P.R. Full Length Threading 1-36 TPI Main Motor 37.5 To 75 Hp.480 Floor Space Right To Left 20' Floor Space Front To Back 7' Machine Height 80" Weight 24,000 Lbs. Flange Holders 4 Tool Post 4 Way On Front Yes Cross Sliding Rear Turret Yes Full Chip Pan And Coolant Yes Power Compound Front Apron Yes Power Chuck Wrench Yes Coolant Yes Note: Machine is in good running order.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. . It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice. Price: $145,500.00 for the above work completed. If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame six to eight weeks depending on part availability Grind ways and refit front and rear aprons (Additional $75,000.00 est.)