Overview
Type:
Lathes, Engine
Manufacturer:
STANDARD MODERN
Model:
1660
Condition:
Used - Good
Stock #:
L3000301
Status:
For Sale
Serial #:
10150
Description

Standard Modern Engine Lathe Model

Specifications
Swing16"
Swing Over Cross Slide10"
Centers60"
Spindle Bore2.06"
RPM2,000 RPM
Power10 hp
DimensionsR-L 108" X F-B 48" X Height 60"
Weight3,050 Lbs.

Machine Swing Over Bed Ways 17" Swing Over Cross Slide 10" Center Distance 60" HEADSTOCK Spindle speeds 18 Geometric speed range 40-2000 RPM Spindle nose - camlock D1-6” Spindle hole 2.06” (52.4 mm) Chuck Size 12" 4- Jaw Chuck Size 8" 3-Jaw FEEDBOX - COMBINATION Feed & thread selections 66 Inch feed range .0015- .105 in./rev. Inch thread range 2 to 127 TPI Metric feed range .04 to 2.67 mm/rev. Metric lead range (threads) .2 to 14 mm APRON Handwheel - one revolution 1.000 in. (25.4 mm) Half nuts Double High speed threading to 800 RPM Repeatability of auto carriage stop +/- .005 in. (+/- .13 mm CARRIAGE CROSS-SLIDE Carriage length on bed 18.25 in. (465 mm) Carriage bridge width 8.5 in. (215 mm) Cross-slide length 20 in. (508 mm) Cross-slide travel 8.5 in. (215 mm) Compound travel 3.8 in. (96 mm) Direct reading dial graduation .001 in. (.02 mm) TAILSTOCK Quill diameter 2.44 in. (62 mm) Quill travel 5 in. (127 mm) Morse taper with tang #4 M.T Offset +/- .75 in. (+/- 19 mm) Main Motor 10 Hp. 220 / Amps 25 /440 15 Amps / 3 / 60 Cycle Floor Space 48" X 108" Machine Height 60" Machine Weight 3,050 Lbs. Taper Attachment Yes Steady Rest Yes Coolant And Chip Pan Yes Back Splash Guard Yes Note: Machine Has Been Cleaned, Painted And Cycled.

Equipped With

Electric brake - self actuating All hardened gears - no clutches Direct reading speed dial Deep bed design Full length rear splash guard Hardened quill with tang drive Convenient Hi-Lo neutral shifter Complete range of inch and metric threads - switchable No transposing gears Feed reverse Leadscrew reverse Chip clean out - front and rear Bi-direction auto carriage stop (feeds and threads) Combination Inch-metric dials Nitrided screw - anti-backlash nuts Standard 115V electric controls (208, 230/460 or 575 volt supply 3 phase

Standard Modern Engine Lathe Model

Standard Modern Engine Lathe Model
Lathes, Engine