1957 WARNER & SWASEY 4A M-3550 Lot 41
Lathes, Turret Saddle Type4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Model | 4A M-3550 |
Swing | 28.25" |
Center Distance | 62 in |
Dimensions | 20' Long. X 84" Wide X 84" High |
Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size (New Heavy Duty) 24" 4- Jaw Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 75 / 37.5 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 84"
Weight 24,000 Lbs.
Flange Holders 2
Slide Tools 1
Power Compound On Front Apron Yes
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Fixed Rear Turret Yes
Full Chip Pan And Coolant Yes
Note: Machine has been reconditioned.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 20"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.