2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 38
Lathes, Turret Saddle Type
2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 38
| Model | 2A M-3470 |
| Swing | 20" |
| Center Distance | 43 in |
| Dimensions | 144" L. X 83" W. X 65" H. |
| Weight | 12,500 Lbs. |
Swing Over Bed Ways 20-1/2"
Swing Over Cross Slide Carriage 16"
Center Distance 43"
Spindle Hole 3-3/4"
Spindle Nose A - 11
Spindle Speeds 6 To 1,117 Rpm's
Chuck Size 16" 3-Jaw
Feeds Long. .005 To .167 I.P.R.
Feeds Cross .0025 To .082 I.P.R.
Main Motor 40 Hp. 220/440 Volts
Floor Space 144" L. X 83" W.
Machine Height 64"
Weight 12,500 Lbs.
Flange Holders Long 1
Flange Holders Short 2
Cross Sliding Rear Turret Yes
Rapid Traverse Front & Rear Carriages Yes
Tool Post 4 Way On Front Carriages Yes
Coolant Yes
Note: Machine has been cleaned, painted and cycled.
Note Reconditioning:
Machines front & rear aprons and rapid traverse box
will be reconditioned. Rapid traverse drive box will be
reconditioned. Headstock cleaned and flushed, new filters
and oil. New lockdown pin and bushing in hex and square turret.
New nut and screw in cross slides. Gibs reworked and refitted.
