1971 WARNER & SWASEY 4A M-3550 Lot 55
Lathes, Turret Saddle Type4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Model | 4A M-3550 |
Swing | 28.25" |
Center Distance | 62 in |
Dimensions | 20' Long. X 84' Wide X 84" High |
Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Chuck Size Power Wrench Type 24" 3-Jaw
Spindle Nose A-15
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Thread Box Minus Lead Screw Yes
Main Motor 25 / 50 Hp. 440 Volts
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 80"
Weight 24,000 Lbs.
Flange Holders 4
Slide Tools 2
Power Wrench Yes
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Cross Sliding Rear Turret Yes
Full Chip Pan And Coolant Yes
Coolant Yes
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. power It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $139,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO received.
Estimated time frame six to eight weeks
Price has is Cleaned, Painted and Cylced. $99,500.00