1975 WARNER & SWASEY 4A M-3550 Lot 679
Lathes, Turret Saddle Type4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Model | 4A M-3550 |
Swing | 28.25" |
Center Distance | 62 in |
Dimensions | 20' Long. X 84" Wide X 84" High |
Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size (New Heavy Duty) 24" 4- Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 30/60 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 84"
Weight 24,000 Lbs.
Coolant Yes
Slide Tools 2
Flange Holders 4
Front And Rear Taper Attachments Yes
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Cross Sliding Rear Turret Yes
Full Chip Pan And Coolant Yes
Note: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gibs Reworked And Refitted. Taper Attachments Taken Apart And Cleaned, LEad Screw And Threading Box To Be Removed, New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.
Reconditioning Will Take Six To Eight After Receipt Of PO And Down Payment. Suject To Change On Part availability.
Grind The Ways And Refit The Saddles. (Call For Price)