Swing Over Bed 26″ Swing Over Cross Slide 17.5″ Swing In Gap 35.1″ Gap Width in Front of the Face Plate 10-5/8″ Distance Between Centers 90″ Width of Bed 15-3/4″ Height of Center from Leg Bottom 44.3″ Chuck Size 16" 3-Jaw New Gator Chuck Size 20" 4-Jaw New Gator Spindle Bore 4-1/16″ Taper of spindle bore and center MT#7 x #5 Type of Spindle Nose D1-11 Number of Spindle Speeds 12 Spindle Speed 13-1200 RPM Number of Feed Changes 16 Feeds per revolution – Longitudinal 0.0012″-0.039″ Feeds per revolution – Cross 0.0007″ – 0.0188″ Leadscrew Diameter & Threads Per Inch 1.77″ , 2 TPI Range of Inch Threads 1-42 TPI (48) Range of Metric Pitches 0.2 – 14 (39) Maximum Travel of Compound 9.5″ Maximum Travel of Cross Slide 15.8″ Tailstock Quill Travel 9.8″ Tailstock Quill Diameter 2.9″ Taper in Tailstock Quill M.T. #5 Main Drive Motor 15 HP Coolant Pump Motor 1/8 HP Floor Space W: 47″ L: 217″ Machine Weight 8,000 Lbs. Taper Attachment Yes Steady Rest Yes Coolant Pans & Pump Yes Note: Machine will be cleaned, painted and cycled.