GANESH GTW 22-120 New Machinery, Engine Lathes | N & R Machine Sales
Overview
Type:
New Machinery, Engine Lathes
Manufacturer:
GANESH
Model:
GTW 22-120
Condition:
New - Build-To-Order
Stock #:
NL300078
Status:
For Sale
Description

STANDARD GTW-22 SERIES LATHE FEATURES: CONSTRUCTION: • Castings made of fine grain and high-density cast iron using the superior Meehanite process yield superior strength and vibration dampening for improved surface finish and extended tool life. • Induction Hardened 52Rc & Precision Ground oversized Turcite - B Anti-Friction coated Bed Ways • Gap-Bed with 29-3/8” swing clearance for added workpiece capacity in the 6.5” wide bed gap HEADSTOCK: • 15-HP spindle motor for efficient metal removal capability • Hardened & ground D1-11 Camlock spindle • 4-1/8” spindle bore. • 3-bearing spindle – 2x NSK 32030 Tapered Roller Bearings, and 1x 6026 rear ball bearing • 12-speed geared-headstock with 15 – 1200 rpm spindle speeds • Alloy Steel Hardened & Ground Headstock Gears • Safety-gated spindle control lever to protect from accidental engagement • Chuck guard with safety interlock switch • Footbrake provided for added safety and operational convenience AXIS FEED DRIVE: • Longitudinal Rapid Traverse positioning for enhanced operator efficiency • Extended Cross-Slide travel of 14.9” (380mm) • Inch / metric, diametral & modular threading capability without the use of change gears • A thread dial indicator is included with the machine for inch & metric thread cutting • Dual Inch/Metric cross-slide, compound slide, and longitudinal feed dials • Safety overload clutch for feed shaft to protect gearing from overloads • Leadscrew Safety Torque Limiting device as well as a shear pin for lead screw • The automatic feed mechanism is mechanically interlocked with the thread cutting engagement lever to prevent damage though simultaneous engagement. • The fourth rod controls a 4-position automatic feed stop which disengages the longitudinal feed motion at 4-distinct adjustable positions. MACHINE FEATURES: • Automatic way lubrication with filtered pressure lubrication system. • Electrical control box and coolant system are equipped with electro-magnetic contactors and overload relay protection devices to prevent motors from burning out to ensure safe operation. • The tailstock features 2-speed quill advance for operational ease and efficiency. • The oversized quill is equipped with a tang-drive and a drift-slot to make removing the centers and taper shank drills very easy without damage to the quill face. • Flood coolant system is included • A toolbox and tool kit with grease gun and touch-up paint is included with the machine • Inspection Report on accuracy to CNS 94 and B7001 standards included • Instruction Manual, Tools and Toolbox with hand tools and lube gun included • One-Year Limited Parts and Labor Warranty Included • Large compliment of parts and accessories stocked in USA to ensure continued operation

Specifications
Swing22"
Swing Over Cross Slide11"
Centers120"
Spindle Bore4.125"
RPM1,200 RPM
Power15 hp
DimensionsWide 51" X 182" Long. X 60" Height
Weight7,363 Lbs.

GTW-22 SERIES MACHINE SPECIFICATIONS Capacity & Dimensions: Swing over Bed 22” Center height 11” Swing over Cross Slide 14-1/8” Swing thru Gap29-3/8” Length of Gap in front of faceplate, D1-11 6-1/2” Bed width 16-1/8” Spindle: Spindle Motor Horsepower 15-HP 12kw High 1200 120 520 50 860 85 Low 375 35 160 15 265 25 (High & Low speed range) Spindle Bore 4-1/8” Spindle Nose D1-11 Camlock (A1-11 optional) Spindle taper in spindle nose MT-8 Morse Taper # 8 Spindle taper reduction sleeve provided MT-5 MT-8 to MT-5 Spindle Max weight capacity (Chuck only) 660 lbs. Spindle Max weight capacity (Chuck and Tailstock) 1,650 lbs. Spindle Max weight capacity (Chuck, Steady Rest and Tailstock) 3,300 lbs. Carriage: Cross slide travel 14.96” Cross slide width 7-3/32” Cross slide lead screw pitch .200”/rev. Cross slide resolution per division 0.001” Carriage lead screw diameter 1-1/2” Carriage lead screw pitch 4 TPI Compound-Four T-nut lock-down bolts on compound cross-slide base Compound top slide travel 10” Compound top slide width 4-11/32” Cutting tool height maximum 1.0” x 1.0” Tailstock: (2-speed quill advance) Engraved with inch / metric quill graduations Quill diameter 2-15/16” Quill stroke 6-5/16” Quill taper MT-5 Quill advance – 2-gear selected advance speeds 1:1 2:1 Tailstock body set-over adjustment ± 0.04” (± 1mm) Thread Cutting-: Thread cutting range – 60-inch pitches 2 – 112 TPI Thread cutting range – 60-metric pitches 0.2 – 14mm Thread cutting range – 50-diametral pitches 4 – 112 D.P. Thread cutting range – 50-module pitches 0.2 – 7 M.P. Feeds- (with clutched feed shaft for safety) Feeds – longitudinal - 50 feeds 0.0014” – 0.0387”/rev. 0.037 – 1.04mm/rev. Feeds – cross - 50 feeds 0.0007” – 0.01935”/rev. 0.0185” – 0.52mm/rev. Power Requirements 220 vac, 3-Phase, 40 Amps (440 vac optional) Coolant System 1/8-HP Pump Motor, 5-gallon (20L) tank capacity Floor Space-Wide 51" X 182" Long. X 52" Height Pounds-7,363 Lbs. Included: Steady Rest with Roller Bearings (Capacity 4” – 10”) Follow Rest 12” Back Plate Full Length Back Splash Guard Chuck Guard with Safety Interlock Switch Foot brake Machine Leveling Pads Halogen Work Light (55 Watts) Machine Options: Peace-of-Mind Factory Installation – includes expenses $1,995.00 Taper Attachment Factory Installed $2,995.00 Wiring for 440-volt input voltage Net Price $395.00 Micrometer Carriage Stop $295.00 Lead Screw Cover- Factory Installed $1,195.00 Digital Readout Options: Match DRO length to the desired bed-length. 2-Axis 80” Newall DP700 Premium DRO’s - installed $3,750.00 2-Axis 100” Newall DP700 Premium DRO’s - installed $4,195.00 2-Axis 120” Newall DP1200 Premium DRO’s - installed $4,750.00 Chuck Options 12” 3-Jaw Chuck $1,495.00 16” 4-Jaw Chuck, D1-11 Direct Mount, 6.3” bore $1,695.00 Tooling and Workholding Heavy Duty Steady Rest –3”-8” capacity w/ Roller Bearings $2,495.00 Heavy Duty Steady Rest –8”-15” capacity w/ Roller Bearings $3,195.00 Live Center MT-5 $1,185.00 Dorian Quick-Change Wedge-Type DA size 4” wide tool-post & 5-toolholders:$1,995.00 1-1” Turning/Facing, Boring/Turning/Facing, H-D Boring, Cutoff/Grooving, Knurling/Facing/Turning

Ganesh Model GTW 22X120 Engine Lathe
New Machinery, Engine Lathes