Overview
Type:
New Machinery, Shot Blast
Manufacturer:
DURA BLAST
Model:
72 Rotary Blast
Condition:
New - Build-To-Order
Stock #:
NS50544
Status:
For Sale
Description

New 72" Dura Blast Rotary Shot Blast

Specifications
Table Size72 in
Dimensions10’ wide x 8’ deep x 14’ tall
Weight7,600 Lbs.

At Plan B, we know we can build a blast machine as cheap or cheaper than any of our competitors, but we choose not to. Harder steel, quality castings, smart designs, maintenance friendly, and modern technology, make for one of the best standard machines you can buy. Please see the following equipment proposal for your blast cleaning application. The enclosed information describes the Dura-Blast 72” Table Wheel Blast with standard features. The machine is considered a plug and play system and is easily moved by utilizing the built-in fork pockets to locate the machine. It is a free-standing cabinet that has a heavy duty, lined, 72” table with a 6000 lb. capacity for material handling. It has one direct drive 20HP, 7-blade blast wheel, and can be matched with one of our 2000 CFM dust collectors. The PLC/Touch Screen controlled, electrical panel is mounted on the side of the cabinet and is protected by vibration dampening mounts. We utilize a double elevator system to fully air-wash all the abrasive thrown by the blast wheel. The two-belt system allows us to keep the air-wash and screen clean-out at eye level, so it is easier to adjust and maintain. This design also allows us to keep the overall height to a minimum, by removing the air-wash from above the hopper. Many of our “standard” features are add-ons and upcharges with other manufacturers, so pay close attention to quotes on similar machines, to see what you are getting for your money. We provide a one-year warranty, full technical support, and readily available replacement parts. General Description Your DuraBlast 72 Table consists of a 72” diameter worktable constructed of ½” steel plate with an abrasive-resistant liner. In brief, the 72” Table Blast operates as follows: Abrasive is fed into a 20HP Direct-Drive Blast Wheel. The Blast Wheel, revolving at 3600 RPM, throws abrasive at the work surface with tremendous velocity. The worktable rotating at a speed of 4 RPM assures exposure of parts to the blast stream. The abrasive is swept from under and around the table and out of the cabinet where it is picked up by the primary elevator and is deposited into the air-wash separator where the abrasive is cleaned. The air-wash separator removes contaminants from cycling abrasive and deposits the clean abrasive into the secondary elevator where it is conveyed to the abrasive storage hopper. The hopper has the capacity to store enough clean abrasive to maintain an even flow to the blast wheel. SPECIFICATIONS – DURABLAST 72” TABLE CENTRIFUGAL BLAST WHEEL Wheel: The direct drive blast wheel revolves at 3600 RPM for maximum abrasive velocity. The blast wheel is available in 12”, 13.5” and 15” diameters. Balanced wheel components assure smooth operation. Blades: Long life, abrasive resistant cast alloy blades, matched by weight for proper wheel balance. Control Cage: Dial type cage. Blast Wheel Housing: Available in ¼” mild steel, AR steel, or manganese steel. All liners are replaceable. CABINET CONSTRUCTION Outer Cabinet: AR 500 construction, fork truck pockets for easy placement. Cabinet Lining: Replaceable cast alloy liners in direct blast area, options to fully line the blast cabinet area, or just line certain areas as needed. Worktable: 72” diameter worktable is constructed of 1/2” steel plate. Table liner is 3/8” abrasive resistant steel. Cabinet cutout makes worktable accessible by overhead hoist. Heavy duty table support bearings are completely enclosed for protection from stray abrasive. Table Drive: Chain driven by an electric motor and gear reducer located under the table. Table revolves at 4 RPM. Double-Lock Door: Our 72-table door has both a pneumatically operated air cylinder clamp, and a pneumatically operated vertical door pin. If power or air is cut to the machine, the door cannot open, and we integrate a timer in case the E-Stop is activated, so you must wait for the wheel to slow down before you can open the door. Rubber door seal helps prevent abrasive escape. A mangalloy door skin helps reduce wear on the inside of the door and does away with unwanted rubber liners. Work Loading Height: 36” Maximum Working Dimensions: 72” diameter, 19” high at edge of table and 37” height at center of table. Workload Capacity: 6,000 pounds. ABRASIVE CLEANING & RECOVERY SYSTEM Elevator and Air Wash: Double V-belt system that carries the abrasive to an adjustable, eye-level separator where 100% of the abrasive is air washed, then cleaned abrasive is carried up to the abrasive storage hopper for feeding of the blastwheel. Easy access screens are in place to help keep larger, foreign items from damaging the blast wheel components. Elevator belts are adjustable to prevent the belts from slipping as they wear. Abrasive Flow: Manually adjustable, butterfly type abrasive valve for setting blast wheel amperage and controlling abrasive flow. Optional Magna-Valve available for automatic adjustment with different abrasives or Shot Peening use. Abrasives: Most standard shot or grit type abrasives can be used, and the initial abrasive charge is 1500 lbs. Dust Collector: Adjustable reverse pulse, 10 cartridge collector, standard Magnehelic gauge, with options available. Separator: 14” gravity lip has adjustable abrasive spreader and refuse gate for maximum contaminate removal. SPECIFICATIONS – DuraBlast 72” TABLE BLAST VENTILATION *Optional Dust Collector: Requires 2000 CFM Power & Air Requirements Control Panel: Nema 12 electrical enclosure, optional voltages available, 3 phase, PLC/Touchscreen controlled, standard automated cycle, digital cycle timer, various adjustable machine timers, audible alarm, heavy duty push buttons, ammeter, and overload protection. Required Air: 80-100 PSI at 5-10 cfm to operate door latch, door safety pin, abrasive valve, and dust collector cleaning cycle. Electric Motors: 20HP blast wheel motor, 2HP table drive motor, 1.5HP elevator motor, and 5HP dust collector motor. Optional Blast Wheel Configuration: Two (2) 10HP, 3600RPM blast wheels, or by request. Standard Operating & Safety Information Safety: Blast wheel will not operate if door is not closed. Door pin safety system keeps the door from opening, even if all power is lost. Standard guards, covers, warning labels, and electrical protections in place. Noise: Approximately 80 DB if properly maintained and in good functioning condition. Shipping Information: Approximately 7600 lbs., ships in two pieces on a standard flatbed trailer, and overall footprint is 10’ wide x 8’ deep x 14’ tall. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Quote: Dura-Blast 72” Table Blast...............................$80,900.00 Standard Features included in Price: (1) 20 HP Direct Drive 12” Blast Wheel Assy. Mounted on hip. 1/2” White iron alloy Liners in line with Blast Wheel Mangalloy and AR500 Blast Cabinet and Door Dual V-Belt Elevator Belts with Poly Buckets Digital Blast Cycle Timer, Hour Meter, Amp Meter on Touch Screen AR500 Table Liner 14” Single Lip Separator with removable screen above separator Options: Auto Abrasive Adder Hoppe................................$1,850.00 Magnavalve (each)........................................$4,100.00 Cast Alloy Liners on RH Wall.............................$8,000.00 Cast Alloy Liners Roof...................................$7,500.00 Cast Alloy Liners Back Wall..............................$5,500.00 Manganese Table Liner....................................$1,000.00 Variable Freq. Drive Blast Wheel 460/3/60................$3,900.00 Variable Freq. Drive Blast Wheel 230/3/60................$4,500.00 Foundry Duty Elevator (2–20” Separators).................$12,000.00 2nd Blast Wheel Option (2) 10Hp Blast Wheels............,$9,000.00 Other blast wheel configurations possible DuraBlast 1032 Dust Collector (Pulse Type, 10 Cartridges, 2000 cfm, Magnehelic Gauge)...$12,900.00 HEPA After Filte..........................................$2,750.00 Photohelic Gauge Kit......................................$800.00 Silencer..................................................$975.00 Dura-Blast Shot Trap (6” inlet/outlet)....................$1,725.00 Foundry Duty option requires different dust collector: DuraBlast 1032 Dust Collector, 3000 cfm...................$14,900.00 (Pulse Type, 10 Cartridges, 1,500cfm, 55-gallon drum) HEPA After Filter.........................................$2,750.00 Photohelic Gauge Kit......................................$800.00 Silencer..................................................$975.00 Ductwork Quoted on request

New 72" Dura Blast Rotary Shot Blast
New Machinery, Shot Blast