4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Overview
Type:
Lathes, Turret Saddle Type
Manufacturer:
WARNER & SWASEY
Model:
Model4A 3550 Lot 38
Year:
1965
Stock #:
L630479
Status:
For Sale
Serial #:
20871181
Description

4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Model 4A 3550 Lot 38 Serial Number 2087181 Year 1965

Specifications
Model4A M-3550
Swing28.25"
Center Distance124 in
Dimensions23'Long. X 84"Wide X 84" High
Weight24,000 Lbs.

Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 124" Center Distance Spindle Nose To Turret Face 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size 24" 4-Jaw Feeds Cross .0035 To .167 I.P.R. Feeds Long. .005 To .167 I.P.R. Threading Lead Screw With Lead -On 1 To 36 TPI Main Motor 75 / 37.5 Hp. 23'Long. X 84"Wide X 84" High Weight 24,000 Lbs. Chuck Size (New Gator Heavy Duty Not Pictured) 25" 4-Jaw Power Wrench Chuck Yes Taper Attachment Rear Apron Yes Coolant Yes Side Tool Holder 1 Flange Holders 5 Tool Post 4 Way On Front Yes Cross Sliding Rear Turret Yes Rapid Traverse Front & Rear Carriages Yes Condition: Very Good

Equipped With

OPTIONAL: Machine Will Have Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gib's Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice.