New
16" X 40" New Webb Engine Lathe
New Machinery, Engine Lathes
16" X 40" New Webb Engine Lathe
| Swing | 16" |
| Swing Over Cross Slide | 9.5" |
| Centers | 40" |
| Spindle Bore | 2.187" |
| RPM | 2,000 RPM |
| Power | 5 hp |
| Dimensions | 83" Long. X 34" Wide X 60" High |
| Weight | 3,100 Lbs. |
Model No. 1640
Swing Over Bed 400mm (16”)
Swing Over Cross Slide 242mm (9 ½”)
Swing Over Gap 552mm (21 ¾”)
Distance Between Centers 1000mm (40”)
Bed Width 260mm (10”)
Number of Spindle Speeds 12
Range of Spindle Speeds 50-2000 RPM
Bore Through Spindle 55mm (2 3/16”)
Spindle Nose D1-6 Camlock
Taper of Spindle Nose MT 6
Tailstock Quill Taper MT 4
Tailstock Quill Travel 110mm (4 3/8”)
Cross Slide Travel 200mm (8”)
Compound Rest Travel 90mm (3 9/16”)
Metric Threads (32 Numbers) 0.4-7.0mm Pitch
Inch Threads (32 Numbers) 4-56 TPI
Module Threads (32 Numbers) 8-120 D.P.
D.P. Threads (32 Numbers) 8-120 D.P.
Longitudinal Feeds 0.029-0.412mm/rev (0.0017”-0.0242”/rev)
Dimensions Width & Length 34" X 82"
Height 60"
Gross Weight 3,100 Lbs.
Main Spindle Motor 5HP (3.7 kW)
Coolant Pump Motor 1/8 HP
Steady Rest Yes
Inch And Metric Dials Yes
Coolant Pan And Pump Yes
Full Length Splash Guard Yes
Thread Dial Yes
One Year Parts Warranty
Prices Subject To Change Without Notice:
Optional Machine
Accessories Description Retail Price
Quick Change Tool Post with 5 Holders $890.00
Taper Tuning Attachment $1,690.00
Installation of Taper Attachment $300.00
Face Plate 14” $395.00
2 Axis Acu-Rite DRO for X and Y Axis $2,890.00
Installation of Any 2 Axis DRO $400.00
2 Axis Newall DRO for X and Y Axis $2,990.00
Installation of Any 2 Axis DRO $400.00
Work Light (110V, 55W) $190.00
Single Saddle Stop $225.00
JFK 5-C Collet Closure $2,090.00
Install Collet Closure $225.00
Standard Features of WB 1640G/1660G:
Bed is made of high tensile case iron FC25, hardened and ground bedways, gears and shafts on headstock are hardened and precisely ground, emergency foot brake is equipped for cutting the power and stopping the machine immediately, open type chip pan designed to remove chips, starting lever with safety device, apron is equipped with an interlock safety device to prevent feeding inter-gearing on the automatic feed and half-nut operation, overload safety device is equipped to shut off feeding automatically when the longitudinal or cross feeding is overloaded or touching and obstacle.
Each 1640G/1660G Machine Includes the Following Standard Accessories
5HP 3PH main driver motor, D1-6 back plate 8" (200mm) & 10" (250 mm), MT 4 center, MT 6x4 center sleeve, 4-way tool post, complete electric control unit, change gears, 1/8 coolant pump, rear splash guard, rapid foot brake, tool box & kits, steady rest, follow rest, 3-Jaw scroll chuck 8" (200mm), 4-Jaw independent chuck 10" (250mm), face plate 10" (250mm), Operators and Parts Manuals.