New Machinery, Engine Lathes
Stock #:
For Sale

26" X 120" New Ganesh Gear Head Engine Lathe STANDARD GANESH GTW-26 SERIES LATHE FEATURES: CONSTRUCTION: Meehanite Castings, fine grain and high-density cast iron using the superior Meehanite process yields superior strength and vibration dampening for improved surface finish and extended tool life. Induction Hardened to 52Rc & Precision Ground oversized Turcite - B Anti-Friction coated Bed Ways Gap-Bed with 33-1/4” swing clearance for added workpiece capacity in the 6.5” wide bed gap HEADSTOCK: 15-HP spindle motor for efficient metal removal capability Hardened & ground D1-11 Camlock spindle (A1-11 spindle optional) 4-1/8” spindle bore. 3-bearing spindle – 2x NSK 32030 Tapered Roller Bearings, and 6026 rear ball bearing 12-speed geared-headstock with 15 – 1200 rpm spindle speeds Alloy Steel Hardened & Ground Headstock Gears Safety gated spindle control lever to protect from accidental engagement Chuck guard with safety interlock switch Footbrake provided for added safety and operational convenience AXIS FEED DRIVE: Rapid feed advance for enhanced operator efficiency Inch / metric, diametral & modular threading capability without the use of change gears A thread dial indicator is included with the machine for inch & metric thread cutting Dual Inch/Metric cross feed, compound, and longitudinal position indicator dials Safety overload clutch for feed shaft to protect gearing from overloads Lead screw Safety Torque Limiting device as well as a shear pin for lead screw The automatic feed mechanism is mechanically interlocked with the thread cutting engagement lever to prevent damage though simultaneous engagement. The fourth rod controls a 4-position automatic feed stop which disengages the longitudinal feed motion at 4-adjustable pre-determined positions. MACHINE FEATURES: Automatic way lubrication with filtered pressure lubrication system. The electrical control box and coolant system are equipped with electro-magnetic contactors and overload relay protection devices to prevent motors from burning out and to ensure safe operation. The tailstock features 2-speed quill advance and is oversized and equipped with a tang-drive and a drift slot to make removing the centers and taper shank drills very easy without damage to the quill face. Flood coolant system is included A tool box and tool kit with grease gun and touch-up paint is included with the machine Inspection Report on accuracy to CNS 94 and B7001 standards included Instruction Manual, Tools and Tool Box with hand tools and lube gun included One-Year Limited Parts and Labor Warranty Included Large compliment of parts and accessories stocked in USA to ensure continued operation

Swing Over Cross Slide18.062"
Spindle Bore4.125"
RPM1,200 RPM
Power15 hp
Dimensions180 " Long. X 60 " Wide X 60 High
Weight7,474 Lbs.

Swing Over Bed Ways 26" Swing Over Cross Slide 18-1/16" Swing In Gap 33-1/4" Length Of Gap In Front Of Faceplate 6-1/2" Bed Way Width 16-1/8" Center Distance 120" Spindle Hole 4.12" Spindle Speeds 15 To 1,200 Rpm's Spindle Nose D-1-11 Spindle Weight Capacity Chuck Only 660 Lbs. Spindle Weight Capacity With Chuck &Tail Stock 1,650 Lbs. Spindle Weight Capacity Tail Stock & Steady Rest 3,300 Lbs. Chuck Size 20" 3-Jaw Chuck Size 20" 4-Jaw Face Plate 20" Cross Slide Travel 14.96" Cross Slide Width 7-3/32" Compound Travel 10" Compound Width 4-11/32" Feeds Cross 0.0014 To 0387 I.P.R. Feeds Long .0014 To .01935 I.P.R. Threads Inch 2 To 112 T.P.I. Threads Metric 0.2 To 14 MM D.P. 4 To 112 T.P.I. Module .02 To 7 MP Tail Stock Quill Diameter 2-5/16" Tail Stock Quill Travel 6-5/16 Tail Stock Taper # 5 Morse Main Motor 15 Hp. 220 / 440/ Machine Dimension 180" L X 60" W Machine Height 60" Weight 7,474 Lbs. Rapid Traverse Yes Foot Brake Yes Coolant Pan & Back Splash Guard Yes Thread Dial Yes Hardened And Ground Ways Optional: Standard Steady Rest 4.3" To 11" Roller Type Steady Rest 3" To 8" Pad Type Steady Rest 8" To 15" Roller Type Follow Rest Telescopic Taper Attachment Newall 2 Axis D.R.O. ALoris Type Tool Post And 5 Tool Holders Condition New

Equipped With

The Ganesh GTW-34-38-42 series machines are all manufactured in our Certified ISO 9001 Production Facility in Taiwan.