1974 Used Warner & Swasey Square Head 4A Model 3550 Lot Saddle Type Turret Lathe
Lathes, Turret Saddle Type1974 Used Warner & Swasey Square Head Model 3550 Lot 777 Saddle Type Turret Lathe
| Model | 4A M-3550 |
| Swing | 28.25" |
| Center Distance | 62 in |
| Dimensions | 2' Long. X 84" Wide X 84" High |
| Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Spindle Hole 9-1/4"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size 24" 3-Jaw
Chuck Size (New Heavy Duty) 24" 4- Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor Hp. 75 / 37.5
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 84"
Weight 24,000 Lbs.
Flange Holders 4
Slide Tools 2
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Cross Sliding Rear Turret Yes
Full Chip Pan And Coolant Yes
Power Wrench Yes
Coolant Yes
Note: Machine will be cleaned, painted, and cycled.
Machine in good running order.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 20"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $139,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
