4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
|Center Distance||62 in|
|Dimensions||20' Long. X 84" Wide X 84" High|
Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (Heavy Duty Power Wrench) 28" 3-Jaw Chuck Size (New Heavy Duty) 24" 4-Jaw New Gator Feeds Cross .004 To .090 I.P.R. Feeds Long. .005 To .167 I.P.R. Main Motor 75 / 37.5 Hp. Floor Space Right To Left 20' Floor Space Front To Back 7' Machine Height 80" Weight 22,000 Lbs. Short Flange Holder 2 Long Flange Holders 1 Tool Post 4 Way On Front Yes Fixed Rear Turret Yes Rapids Front & Rear Yes Power Compound Front Apron Yes Taper Attachment On Front Apron Yes Slide Tool Holders 2 Power Wrench Yes Coolant Yes
Note: Machine's Front & Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New Lockdown Pin And Bushing In Hex And Square Turrets, New Nut And Screw In Cross Slide And Hex Turret. Gib's Have Been Reworked And Refitted. New 24"4-Jaw Gator Chuck W/ Reconditioning. Machine Has Been Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice. Once machine is in plant and leveled, it is recommend the customer boring the rear turret flange holders to insure they are on center.