1961 WARNER & SWASEY 2A M-3470 Lot 39 Lathes, Turret Saddle Type | N & R Machine Sales
Overview
Type:
Lathes, Turret Saddle Type
Manufacturer:
WARNER & SWASEY
Model:
2A M-3470 Lot 39
Condition:
Used - Good
Year:
1961
Stock #:
L630458
Status:
For Sale
Serial #:
1858405
Description

2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe

Specifications
Model2A M-3470
Swing20.5"
Center Distance43 in
Dimensions144" Long. X 72" Wide X 72" High
Weight12,500 Lbs

Swing Over Bed Ways 20-1/2" Swing Over Cross Slide Carriage 16" Center Distance 43" Chuck Size 18" 3-Jaw Spindle Hole 3-3/4" Spindle Nose A - 11 Spindle Speeds 32 To 1117 Rpm's Chuck Size (New Gator) 16" 4-Jaw Feeds Cross .0025 To .082 I.P.R. Feeds Long. .005 To .167 I.P.R. Main Motor 20/40 Hp. 440 Volts Floor Space 144"L. X 83" W. Machine Height 64" Weight 12,500 Lbs. Flange Holders Short 3 Flange Holders Long 1 Slide Tool Holders 1 Tool Post 4 Way On Front Carriages Yes Rapid Traverse Front & Rear Carriages Yes Fixed Rear Turret Yes Coolant Yes Note: Machine has been reconditioned.

Equipped With

Note Reconditioning: Machines front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide. Gibs reworked and refitted. New 16"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice. Optional: 12" 3-Jaw A2-11 Gator Steel Body Scroll Type Chuck $15,700.00

1961 WARNER & SWASEY 2A M-3470 Lot 39
Lathes, Turret Saddle Type