1983 WARNER & SWASEY 4A M-3550
Lathes, Turret Saddle Type4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
| Model | 4A M-3550 |
| Swing | 28.25" |
| Center Distance | 62 in |
| Dimensions | 20' Long X 84" Wide X 84" High |
| Weight | 24,000 Lbs. |
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Center Distance 62"
Chuck Size (New Heavy Duty) 24" 4 - Jaw Gator
Spindle Nose A-1-15
Spindle Speeds 20 To 526 Rpm's
Spindle Hole 9-1/4"
Feeds Long. .005 To .167 I.P.R.
Feeds Cross .0035 To .167 I.P.R.
Main Motor 75 Hp.
Floor Space 20' X 7'
Height 84"
Weight 24,000 Lbs.
Flange Holders 4
Cross Sliding Rear Turret Yes
Rapid Traverse Front And Rear Yes
Tool Post 4 Way On Front Yes
Coolant Yes
Note: Machine is in good running conditioned.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $154,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
