One Used 3 A Warner & Swasey Square Head Saddle Type Turret Lathe Model 3500 Lot 72
Lathes, Turret Saddle Type
One Used 3 A Warner & Swasey Square Head Saddle Type Turret Lathe Model 3500 Lot 72
| Model | 3A M-3500 Lot 72 |
| Swing | 24" |
| Center Distance | 40 in |
| Dimensions | 180" Long X 84" Wide X 64" High |
| Weight | 17,000 Lbs. |
Swing Over Bed Ways 23-1/2"
Swing Over Cross Slide Carriage 18"
Center Distance 40"
Spindle Hole 6-1/4
Spindle Speeds 24 To 628 Rpm's
Spindle Nose A-15
Chuck Size Front 21" 3-Jaw
Chuck Size Rear 20" 3-Jaw
Feeds Cross .0025 To .082 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 50 Hp. 480 Volts
Floor Space 180" L. X 84" W.
Machine Height 64"
Weight 15,000 Lbs.
Flange Holders Short 3
Slide Tool 2
Rear Adpator & Chuck Installed Yes
Rapid Traverse On Both Carriages Yes
Fixed Rear Turret Yes
Tool Post 4 Way On Front Yes
Coolant Yes
Power Wrench Removed Yes
Note: Machine has been cleaned, painted and cycled.
In good working condition.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide. Gibs reworked and refitted.It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $64,500.00 for the above work completed.
If you would like the machine reconditioned, the above work will be started once the PO and deposit are received.Estimated time frame eight weeks.
