3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
|Center Distance||40 in|
|Dimensions||180" Long. X 84" Wide X 64" High|
Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 40" Spindle Hole 6-1/4" Spindle Speeds 24 To 851 Rpm's Chuck Size 21" 3-Jaw Spindle Nose A-15 Feeds Cross .0025 To .082 I.P.R. Feeds Long. .005 To .167 I.P.R. Threads Less Lead Screw 1 To 36 TPI Main Motor 30 Hp. 440 Floor Space 180" L. X 84" W. Machine Height 64" Weight 15,000 Lbs. Slide Tools 2 Flange Holders 3 Tool Post 4 Way On Front Yes Rapid Traverse Front And Rear Yes Fixed Rear Turret Yes Power Wrench Chuck Yes Coolant Yes Machine will be cleaned, painted, and cycled. Machine in good running order.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide. Gibs reworked and refitted. New 20"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice. Price: $54,500.00 for the above work completed. If you would like the machine reconditioned, the above work will be started once the PO and deposit are received. Estimated time frame eight weeks