3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
|Center Distance||40 in|
|Dimensions||180" Length X 84" Wide X 65" High|
Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 40" Spindle Hole 6-1/4" Spindle Speeds 24 To 851Rpm's Chuck Size 21" 4 Jaw (New Gator) Spindle Nose A-15 Feeds Cross .0025 To .082 I.P.R. Feeds Long. .005 To .167 I.P.R. Main Motor 25 / 50 Hp. 480 Volts Floor Space 180" L. X 83" W. Machine Height 64" Weight 15,000 Lbs. Flange Holders Short 3 Flange Holders Long 1 Coolant Yes Tool Post 4 Way On Front Yes Rapid Traverse Rear Yes Cross Sliding Rear Turret Yes Optional: Power Wrench & Power Wrench Chuck In Place Of 21" 4-Jaw Chuck Note: Machine will be cleaned, painted, and cycled. Machine is in good running order.
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice. Price: $74,500.00 for the above work completed and adding power wrench and power wrench chuck If you would like the machine reconditioned, the above work will be started once the PO received. Estimated time frame six to eight weeks