WHACHEON HL-580
New Machinery, Engine Lathes22" X 80" Whacheon Engine Lathe ( Mori Seiki Copy )
Machine Is New, Please Call For Price And Availability.
Swing | 22" |
Swing Over Cross Slide | 14.165" |
Centers | 80" |
Spindle Bore | 3" |
RPM | 1,350 RPM |
Power | 10 hp |
Dimensions | 146.2 Long. X 48" Wide X 65" High |
Weight | 7,256 Lbs. |
Swing Over Bed Ways 22"
Swing Over Cross Slide 14-11/64"
Swing In Gap 31"
Gap Length 10-5/8"
Bed Width 16-1/2"
Center Distance 78.7"
Spindle Hole 3-1/32"
Spindle Speeds 28 To 1,350 Rpm's
Spindle Nose D-1-8
Feeds Cross 00015 To 0212 I.P.R.
Feeds Long .0014 To .0196 I.P.R.
Threads Inch 2 To 80 T.P.I.
Threads Metric .25 To 14 MM
D.P. 8 To 112 T.P.I.
Module .05 To 3.5 T.P.I.
Tail Stock Quill Diameter 3"
Tail Stock Quill Travel 6"
Tail Stock Taper # 5 Morse
Main Motor 10 Hp.
Machine Dimension 146.2" L X 48" W X 65" High
Weight 7,256 Lbs.
Change Gear 60 T
Worm Gears / Metric System Only 14T, 19T, 20T & 24 T
Face Plate Gap Bed Only 17-3/4"
Steady Rest 1.5" To 6"
Driving Plate 11-3/4"
Center Sleeve MT #7
Live Center MT #5
Dead Center MT #5
Coolant Pan Only Yes
Thread Dial Yes
Carraige Micro Stop Yes
Hardened And Ground Ways Yes
Optional Accessories Will Be Added To Base Price:
Newall D.R.O. 2 Axis $4,450.00 Installed
Taper Attachment $ 5,950.00 Installed
Chuck Options:
BTC 16"4-Jaw $2,450.00
Gator 16" Semi-Steel Chucks, Direct Mount D1-8,
4-Jaw Independent, With 2 Piece Jaws $3,615.00
Gator 15" 3-Jaw Scroll With 2 Piece Jaws Direct Mount D1-8 $2,750.00
Aloris Type Tool Post And 5 Holders $1,450.00
Steady rest Over size (6"-10") $2,550.00)
Follow Rest $865.00
Roller Jaws for Steady Rest $625.00
Note Warranty Available
Condition New
Features:
Number(12 steps) and range of speeds of this lathe is so created that the most suitable cutting speed may be given to any size of workpiece diameter within the possible range of cutting size, namely, within the range of swing over bed.
The main spindle is supported at three points by precision bearings and its hole is generously sized.
Automatic forced lubrication system supplies lubricant to every sliding way and driving mechanism inside the headstock.
By lubricating device installed inside apron, automatic lubrication is provided between carriage slideways and bed ways.
An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop.
The machine is equipped with an overload safety device for feeding and thread cutting.
Cross feed screws are always supplied a proper quantity of grease more than one time per a week for maintaining smooth travel under maximum accuracy.
Bed is so designed to prevent torsion, side-wall is double wall and rib type.
Hardened and ground bed ways are made of high tensile cast iron. Produced under the license of Meehanite Know-How.
Lower portions of bed casting are box-shaped and are full length, forming the legs, chip pan and coolant reservoir.
The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock.