26″ x 90″ Used Kingston Lathe Model HD-2690
Lathes, Engine26″ x 90″ Used Kingston Lathe Model HD-2690
Swing | 26" |
Swing Over Cross Slide | 17.75" |
Centers | 90" |
Spindle Bore | 4.0625" |
RPM | 1,200 RPM |
Power | 15 hp |
Dimensions | R-L 217" X F-B 60" X Height 60" |
Weight | 8,000 Lbs. |
Swing Over Bed.......................................26″
Swing Over Cross Slide...............................17.5″
Swing In Gap.........................................35.1″
Gap Width in Front of the Face Plate.................10-5/8″
Distance Between Centers.............................90″
Width of Bed.........................................15-3/4″
Height of Center from Leg Bottom.....................44.3″
Chuck Size...........................................16" 3-Jaw New Gator
Chuck Size...........................................20" 4-Jaw New Gator
Spindle Bore.........................................4-1/16″
Taper of spindle bore and center.....................MT#7 x #5
Type of Spindle Nose.................................D1-11
Number of Spindle Speeds.............................12
Spindle Speed........................................13-1200 RPM
Number of Feed Changes...............................16
Feeds per revolution – Longitudinal..................0.0012″-0.039″
Feeds per revolution – Cross.........................0.0007″ – 0.0188″
Leadscrew Diameter & Threads Per Inch................1.77″ , 2 TPI
Range of Inch Threads (48)...........................1-42 TPI
Range of Metric Pitches(39)..........................0.2 – 14
Maximum Travel of Compound...........................9.5″
Maximum Travel of Cross Slide........................15.8″
Tailstock Quill Travel...............................9.8″
Tailstock Quill Diameter.............................2.9″
Taper in Tailstock Quill.............................M.T. #5
Main Drive Motor....................................15 HP
Coolant Pump Motor...................................1/8 HP
Floor Space..........................................R-L 217" X F-B 60"
Machine Height.......................................60"
Machine Weight.......................................8,000 Lbs.
Taper Attachment.....................................Yes
Steady Rest..........................................Yes
Coolant Pans & Pump..................................Yes
Note:
Machine will be cleaned, painted two-tone light and dark grey and
cycled. Machine is being processed at the present time. Should
be ready to ship in about 2 weeks.
Optional Equipment: Prices subject to change without notice:
Newall 2 Axis D.R.O. System Installed.............$5,850.00
Aloris Type Tool Post & 5 Holder..................$1,950.00
Used Chuck 18" 6-Jaw..............................$3,250.00
Prices subject to change without notice: