Pushbutton control of sawing down feed
Fully adjustable counterbalance spring to control weight of saw frame
Variable Hydraulic Feed Rate Control
Spring loaded Carbide Guides with Rollers
Combination Blade Drive:
Reduction Gearbox and
Perimeter Ring & Pinion
3 HP Motor 3 Phase TEFC
2 HP Single Phase ODP
Infinitely Variable Blade Speeds
Rite-Tension® Blade Tensioning Device
Wet Cutting System
Powered Blade Brush
110 Volts at Controls
Overload and Under voltage Protection
Precision Ground Bed and Vise Jaws
Quick Acting Vise
Adjustable Stock Stop
Auto Shut-Off at End of Cut
OSHA Blade Guarding
Tiger-Tooth® Bi-Metal Blade
Coolant for Initial Start-Up
Optional Features for consideration:
Available Options and Accessories
For installation at time of manufacture.
Flush Hose Kit DL 1316S-905 $298.00
Variable Speed, Frequency type / AC Motor $2,113.00
Casters: Set of four (2 locking) 100113-003 $186.00
Fused Disconnect (NEMA Type 1) $648.00
NFPA Electrics NEMA 12 Enclosure, Fused Disconnect, IEC Components $846.00
50 Hz / Export Voltage $Contact Factory
Leveling/Vibration Mounts 098041-004 $91.00
MQL Lubricant System ("Near Dry" system) $906.00
Lubricant for MQL System, one gallon $71.00
Blade Break/Stall Switch DL 1316S-807 $747.00
Laser Line Pointer $711.00
5ft x 18" 098050-013 $703.00
10ft x 18" 098050-014 $1,164.00
Mid-Duty Stock Stand,
250 lb. capacity, 18" wide roller098047-001 $181.00
Heavy Duty Stock Stand,
1000# capacity, 6" wide roller M-325BM-325H with casters $427.00
Heavy Duty Stock Stand,
1000# capacity, 12" wide rollerM-326BM-326H with casters $457.00
Freight Quote Disclaimer. Please read.
These policies are controlled by the carrier not by Wellsaw.
Unless specified in the quote,
Freight is quoted only for the item(s) at the time of the request. If your customer changes or adds options to the order this quote is no longer valid.
This quote is valid for 30 days.
This freight quote is based upon shipment to a BUSINESS location in the ZIP code provided. The carrier assumes that the business has a loading dock and fork truck to unload the package.
There will be additional charges if the carrier determines that the ship-to location is Non-Commercial, also referred to as "residential" or "farm".
There will also be additional fees for:
lift gate services
advance-notice phone calls
delivery to schools, training centers, church or government offices
delivery to location needing an appointment and/or escort such as: military facility, secure commercial facility (i.e. large mill or plant)
Wellsaw band saw machines meet the OSHA safety standards that are in effect as of the time of this writing. Compliance with OSHA requirements is the legal responsibility of the user. All Wellsaw band saws now include as standard equipment, blade guards, low voltage protected switches with automatic cut-off at the completion of a cut, enclosed belt and pulley guards and grounded electrical features.
WARRANTY PERIOD: One year from the date of purchase.
Wellsaw band saws are warranted against defects in material or workmanship installed or performed at our factory. Within the warranty period we will, free of charge, at our option, either repair or replace any part which our examination discloses to be defective because of workmanship or defect in the material. This warranty does not apply if the machine or part has been used in a manner inconsistent with its design or which has been subject to accident, alteration, abuse or misuse or which fails due to lack of care or is the result of improper power supply and specifically does not apply to normal wear. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Wellsaw shall not be liable of consequential or incidental damages suffered or incurred with respect to defective materials or workmanship. We do not authorize any person or representative to make any other warranty or to assume for us any liability in connection with the sale of our products other than those contained herein. Any agreements outside of or contradictory to the foregoing shall be void and of no effect. All transportation costs on products or parts submitted to Wellsaw under this warranty must be paid by the user. No products or parts are to be returned without first obtaining permission