24 X 78 Whacheon Engine Lathe ( Mori Seiki Copy )


24" X 78" Whacheon Engine Lathe ( Mori Seiki Copy )

Stock Number: LN300024

Whacheon HL-630-3000


      
Click to view larger photo

Request A Quote On Our Stock Number: LN300024 24 X 78 Whacheon Engine Lathe ( Mori Seiki Copy )Request a quote on stock# LN300024
SpecificationDescription
Swing Over Bed Ways24.8"
Swing Over Cross Slide14.9"
Bed Width20.7"
Center Distance78"
Spindle Hole3-1/32"
Spindle Speeds27 To 1,205 Rpm's
Spindle NoseD-1-8
Chuck SizeNo
Feeds Cross.0010 Ro .029 I.P.R.
Feeds Long.0015 To .0433 I.P.R
Threads Inch2 To 56 T.P.I.
Threads Metric5 To 14 MM
D.P.4 TO 56 T.P.I.
Module1 TO 7 T.P.I.
Cross Slide Travel15.35"
Compound Rest Travel6.69"
Tail Stock Quill Diameter3-1/4"
Tail Stock Quill Travel6"
Tail Stock Taper# 5 Morse
Main Motor15 Hp.
Weight7,630 Lbs.
Machine Dimension146" L X 60.4"
Height60"
Coolant PanYes
Thread DialYes
Hardened And Ground WaysYes
Follow Rest$825.00
Oversized Steady Rest (11"X17")$3,050.00
Telescopic Taper Attachment$4,85.00
  
NoteWarranty Available
  
ConditionNew

Equipped With:
Features Number(12 steps) and range of speeds of this lathe is so created that the most suitab le cutting speed may be given to any size of workpiece diameter within the possible range of cutting size, namely, within the range of swing over bed. The main spindle is supported at three points by precision bearings and its hole is generously sized. Automatic forced lubrication system supplies lubricant to every slidingway and driving mechanism inside the headstock. By lubricating device installed inside apron, automatic lubrication is provided between carriage slideways and bedways. An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop. The machine is equipped with an overload safety device for feeding and thread cutt ing. Cross feed screws are always supplied a proper quantity of grease more than one time per a week for maintaining smooth travel under maximum accuracy. Bed is so designed to prevent torsion, side-wall is double wall and rib type. Hardened and ground bedways are made of high tensile cast iron. Produced under the license of Meehanite Know-How. Lower portions of bed casting are box-shaped and are full length, forming the legs, chip pan and coolant reservoir. The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock. Standard Accessories: Center sleeve Change gear 78T Face plate (0550) Installation block Coolant equipment Tool kits & box Carbide center MT #5 Worm gear (14T, 19T, 20T, 24T) Steady rest (Standard 6" -11 ") Carriage micro stopper Driving plate (0330) Face plate (0635) Optional Accessories: Follow rest (1.5" -5") Live center Change gear (65T, 157T) Taper Attachment Roller type. 6"-11") Tailstock quill reduction equipment Steady rest (Over size 11"-17", Follow rest (1.5" -5")


HomeIndexContact


24 X 78 Whacheon Engine Lathe ( Mori Seiki Copy )
N & R Machine Sales
9292 Industrial Drive
Navasota, Texas 77868
936 825 2600
936 825 2679
sales@nrmachinesales.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com