COSEN Model C-320NC 12.6 X 12.6" Fully Automatic Horizontal Dual Column Band Saw
Saws, Horizontal Dual Column SawCOSEN Model C-320NC 12.6 X 12.6" Fully Automatic Horizontal Dual Column Band Saw
Rect-Cap (H) | 12.6" |
Rect-Cap (W) | 12.6" |
Rounds-Cap | 12.6" |
Square-Cap | 152.64" |
Power | 5 hp |
Type (Auto, Manual, Semi) | Auto |
Blade Width | 1.25" |
Blade Thickness | 0.042" |
Blade Length | 167" |
Dimensions | R-L 83" X F-B 83" X Height 70.1" |
Weight | 3,758 Lbs. |
Cosen's C-320NC is a high production machine which incorporates a massive base, sturdy saw
frame, with an extremely heavy-duty gear box, a 5 HP drive motor, and a user friendly
programmable control for ease of operation. Rugged, dependable, and advanced technology,
are all words that describe Cosen's C-320NC production machine, making it the perfect saw for
mass production settings.
Control System: Smart NC-
Smart NC-100 (SNC-100) technology provides most of the benefits of NC controlled saws at a
mere fraction of the cost. SNC-100 controls are programmable up to 100 different
jobs including quantity and length of cut. The controls automatically compensate for Kerf
loss after data input and requires no manual calculation of number of times to index.
Machine Specifications:
Maximum Cutting Capacity Round 12.6”
Square 12.6” x 12.6”
Rectangular 12.6” x 15”
Bundle Width: 7.5” - 11.8”
w/ optional top clamps Height: 2.8” - 5.5”
Remnant Piece 2”
Work Bed Height 31.1”
Blade Variable Speed 66 – 328 fpm
Size 13’ 11” x 1.25” x .042”
Motor Saw Blade 5 HP
Hydraulic 1 HP
Coolant 1/8 HP
Auto. Material Feed System Job Storage Up to 100 jobs
Single Index Stroke 0” to 15.9”
Multiple Stroke Indexing 0” to 999”
(Automatic kerf compensation)
Power 230V, 3 PH, 60 Hz 20 Amps
(460, 3 PH, 60 Hz 10 Amps Option)
Floor Space 82.7” x 82.8” x 70.1”
Weight 3,758 LBS
Included Accessories
Blade “clip” device eases blade changing, when necessary, by holding the blade on the band
wheel during installation, making it very easy for one person to change the blade.
Adjustable fence to support bundled cut-off stock
Additional flushing hose for cleaning
Built in work light
Bimetal saw blade
Toolbox with tools, leveling pads, and an additional wire brush
Operation & parts manual
Full Stroke Vises
Double Retracting Vises
Hydraulic Powered Chip Auger
Heavy-Duty 7’ Idle conveyors w/ vertical alignment rollers
Optional Accessories
Variable Vise Pressure Control System (Part# AHA-10400KIT) $1,395.00
Hydraulic Top Clamps (Part# AHC-1900A) $2,795.00
Heavy-duty Roller Table 5’ long (Part# RT-5-19PM) $2,195.00
Heavy-duty Roller Table 7’ long w/vertical Rollers (Part# 05RC-4470-2M) $2,795.00
Heavy-duty Roller Table 10’ long (Part# RT-10-19PM) $3,495.00
Micro Droplet Applicator $2,795.00
Buck Boost Transformer for incoming power of 208V or below $1,495.00
Voltage Change to 460V, 3 Phase $995.00
QR Code Reader $2,995.00
*Please note that machine design and specs can change without notice*
Machine Features:
Hydraulic dual column design
Gearbox designed to accept high lateral pressure (no thermal distortion)
Inverter blade drive system which allows infinitely variable blade speeds
5.7” HMI touchscreen
Adjustable flood coolant system
Motor driven, synchronized wire blade brush
Carbide blade guides and bearing provides additional blade support
Rigid cast-iron guide arms
Automatic hydraulic blade tensioning device
Cast-iron hydraulic vise
Split vise jaw for reduced burr
Save-A-Blade feature
Precision feed pressure and feed rate dual valve system for optimal cutting performance
Computer controlled multiple indexing up to 999” max length